Chapter 1. Introduction
Components
CE680L / CE690L (Local Unit) Front View
5
123 4
No. | Component | Description |
|
|
|
1 | KVM Port | Use the Custom KVM cable supplied with this unit: |
|
| DVI Input port: The DVI connector of the provided |
|
| Custom KVM cable that connects to your computer |
|
| plugs into this port. |
|
| USB Port (for Keyboard / Mouse): The USB Type |
|
| B connector of the provided Custom KVM cable that |
|
| connects to your computer plugs into this port. |
|
| Audio Ports (Speakers / Mic): These mini stereo |
|
| ports are for the speakers (green) and microphone |
|
| (pink) connectors of the provided Custom KVM |
|
| cable that connects to your computer. |
|
|
|
2 | Connect the | |
|
| this port. |
|
|
|
3 | USB Type B Port | Connect the USB cable from your computer to this port |
|
| if using a touchscreen panel device. |
|
|
|
4 | Operation Mode | The Auto / Local pushbutton toggles between the |
| Pushbutton | Operating Modes available from the Local Console. |
|
| Auto – both the Local and Remote Consoles can |
|
| control the system. |
|
| Local – only the Local Console can control the |
|
| system(s). |
|
| The default operating mode is Auto. |
|
| You can also use this button to enable the Firmware |
|
| Upgrade Mode. Reset the power to proceed with the |
|
| firmware upgrade. See page 25 for full details. |
|
|
|
5 | LEDs | The CE680L / CE690L has two LEDs to indicate the |
|
| operating status. See page 17 for full details. |
|
|
|
5