CE680 / CE690 User Manual

Firmware Upgrade

Refer to The Firmware Upgrade Utility in Chapter 5 for a step-by-step guide on upgrading the firmware. In summary, do the following steps:

1.Push and hold the Operation Mode pushbutton and power on the Local or Remote unit to enter the firmware upgrade mode.

2.Connect a computer to the RS-232 port of the local/remote unit.

3.Use ATEN Firmware upgrade utility to do the firmware upgrade.

Note: Do these steps for the Local and Remote units individually (Single Unit Mode, page 26). To upgrade the units together, see Local and Remote Mode, page 29.

Wake Up PC

When at the remote console’s location and you want to wake a computer on the local site, use the Wakeup PC pushbutton on the front panel of the CE680R / CE690R.

CE680R / CE690R

Make sure to use an RS-232 cable to connect the local computer to the CE680L / CE690L in order for this command to work.

Note: The PC’s BIOS should support RS-232 wake up function.

18