CE680 / CE690 User Manual

Single Unit Mode

To prepare for the Firmware Upgrade, do the following:

1.Turn off the CE680L / CE690L or CE680R / CE690R and unplug the power adapter.

2.Push and hold the Operation Mode pushbutton on the CE680L / CE690L or CE680R / CE690R front panel. This enables the Local/Remote Unit to operate in Firmware Upgrade Mode when it is powered on again.

3.Plug in the power adapter and power on the CE680L / CE690L or CE680R / CE690R. Note that the LEDs start flashing.

4.Use a Serial RS-232 cable to connect a COM port on your computer to the CE680L / CE690L or CE680R / CE690R RS-232port.

Note: The Serial RS-232 cable is not provided in the package.

Starting the Upgrade

To upgrade your firmware:

1.Run the downloaded Firmware Upgrade Package file

(CE680_CE690_Vx.x.xxx.exe)) – either by double clicking the file icon, or by opening a command line and entering the full path to it.

The Firmware Upgrade Utility Welcome screen appears:

Note: The screens used in this section show the Local Unit (CE680L) and are for reference only. The wording and layout of the actual screens put up by the Firmware Upgrade Utility may vary slightly from these examples.

26