No. | Component | Description |
|
|
|
1 | Handle | Pull to slide the KVM module out; push to slide the module in |
|
| (see item 13 in this table). |
|
|
|
2 | LCD Display | After sliding the KVM module out, flip up the cover to access |
|
| the LCD monitor. |
|
|
|
3 | LCD Controls | The LCD On/Off switch is located here, as well as buttons to |
|
| control the position and picture settings of the LCD display. |
|
| See p. 20, for details. |
|
|
|
4 | Port Switches | Press a switch to bring the KVM focus to the computer |
|
| attached to its corresponding port. See p. 22 for details. |
|
|
|
5 | Port LEDs | Two Port LEDs are built into the Port Switches. The one on |
|
| the left is the On Line LED; the one on the right is the |
|
| Selected Port LED: |
|
| An On Line LED lights ORANGE to indicate that the com- |
|
| puter attached to its corresponding port is up and running. |
|
| A Selected LED lights GREEN to indicate that the com- |
|
| puter attached to its corresponding port is the one that has |
|
| the KVM focus. The LED is steady under normal condi- |
|
| tions, but flashes when its port is accessed under Auto |
|
| Scan Mode (see p. 40). |
|
|
|
6 | Keyboard |
|
|
|
|
7 | Touchpad |
|
|
|
|
8 | Power LED | Lights BLUE to indicate that the unit is receiving power. |
|
|
|
9 | Rack Mounting | The rack mounting brackets located at each corner of the unit |
| Brackets | secure the chassis to a system rack. |
|
|
|
10 | Lock LEDs | The Num Lock, Caps Lock, Scroll Lock LEDs are located |
|
| here. |
|
|
|
11 | Reset Switch | Located to the right of the Lock LEDs. Press this recessed |
|
| switch in with a thin object to perform a system reset. |
|
|
|
12 | Firmware | Firmware Upgrade Port: The Firmware Upgrade Cable |
| Upgrade | that transfers the firmware upgrade data from the adminis- |
| Section | trator's computer to the |
|
| |
|
| Firmware Upgrade Switch: During normal operation this |
|
| switch should be in the NORMAL position. (See p. 49 for |
|
| firmware upgrading details.) |
|
|
|
13 | Slide Release | In order to slide the console out, you must first release it by |
|
| sliding these tabs to the inside. See p. 17 for details on sliding |
|
| the console in and out. |
|
|
|
6