4. OSD Operation
(Continued from previous page.)
Setting | Function |
|
|
RESET STATION | If you change the position of one of the Stations in the daisy chain, |
IDS | the OSD settings will no longer correspond to the new situation. |
| This function directs the OSD to rescan the Station positions of the |
| entire installation and updates the OSD so that the OSD Station |
| information corresponds to the new physical layout. |
| Note: Only the Station Numbers get updated. Except for the Port |
| Names, all Administrator settings (such as Set Accessible Ports, |
| Set Quick View Ports, etc.), for all of the computers affected by the |
| change, have to be manually redone. |
|
|
FIRMWARE | In order to upgrade the |
UPGRADE | Chapter 6), you must first enable Firmware Upgrade Mode with this |
| setting. |
| When you bring up this menu, the current firmware version levels |
| display. Select Y to enable Firmware Upgrade Mode, or N to leave |
| this menu without enabling it. |
|
|
SET CONSOLE | This setting selects which consoles (internal/external) are enabled: |
MODE | 0Both consoles enabled |
| |
| 1LCD console only |
| 2External console only |
| Use the spacebar to cycle to the choice you want. The default is 0. |
|
|
37