(Continued from previous page.)
Setting | Function |
|
|
SET QUICK | This function lets the Administrator select which Ports to include as |
VIEW PORTS | Quick View ports. |
| To select/deselect a port as a Quick View Port, use the |
| Navigation Keys to move the highlight bar to it, then press the |
| [Spacebar]. |
| When a port has been selected as a Quick View Port, an |
| arrowhead displays in the QV column of the LIST on the Main |
| Screen to indicate so. When a port is deselected, the arrowhead |
| disappears. |
| If one of the Quick View options is chosen for the LIST view (see |
| F2 LIST, p. 31), only a Port that has been selected here will |
| display on the List. |
| If one of the Quick View options is chosen for Auto Scanning |
| (see SCAN/SKIP MODE, p. 33), only a Port that has been |
| selected here will be Auto Scanned. |
| The default is for no ports to be selected. |
|
|
SET | This function allows the Administrator to define User access to the |
ACCESSIBLE | computers on the installation on a |
PORTS | For each User, select the target Port; then press the [Spacebar] to |
| |
| cycle through the choices: F (Full access), V (View only), or blank. |
| Repeat until all access rights have been set, then press [Enter]. |
| The default is F for all users on all ports. |
| Note: A blank setting means that no access rights are granted. The |
| port will not show up on the User's LIST on the Main Screen. |
|
|
(Table continues on next page.)
36