F5 SKP
This function enables you to easily skip backward or forward - switching the KVM focus from the currently active computer port to the previous or next available one.
The selection of computers to be available for Skip Mode switching is made with the Scan/Skip Mode setting under the F3 SET function (see p. 32).
When you are in Skip Mode, press:
←To skip from the current port to the previous port in the List.
→To skip from the current port to the next port in the List.
↑To skip from the current port to the last port of the previous station in the List.
↓To skip from the current port to the first port of the next station in the List.
Note: When you Skip, you only Skip to the previous or next available computer that is in the Scan/Skip Mode selection (see p. 33).
If a Port has been selected for Scan/Skip Mode, when the focus switches to that port a Left/Right Triangle symbol appears before its Port ID Display to indicate so.
While Skip Mode is in effect, the console will not function normally. You must exit Skip Mode in order to regain control of the console.
To exit Skip Mode, press [Spacebar] or [Esc].
38