Chapter 2
Hardware Setup
1.Important safety information regarding the placement of this device is provided on page 123. Please review it before proceeding.
2.Make sure that the power to any device that you connect to the installation has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
3.Any installation that does not follow the instructions in this guide may be hazardous.
4.The power source for this product is intended to be supplied by a power adapter only, not a DC mains.
Stacking and Rack Mounting
Stacking
The CN8600 can be placed on any appropriate level surface that can safely support its weight plus the weight of its attached cables. To place or stack the CN8600, remove the backing material from the bottom of the rubber feet that came with this package, and stick them onto the switch's bottom panel at the corners, as shown in the diagram, below
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and 12.7cm at the back for power cord and cable clearance.
13