| Chapter 5. The Client Viewer |
|
|
|
|
|
|
Option | Usage |
|
|
Video Quality | Drag the slider bar to adjust the overall video quality. The larger |
| the value, the clearer the picture and the more video data goes |
| through the network. Depending on the network bandwidth, a |
| high value may adversely affect response time. |
|
|
Enable Refresh | The CN8600 can redraw the screen every 1 to 99 seconds, |
| eliminating unwanted artifacts from the screen. Select Enable |
| Refresh and enter a number from 1 through 99. The CN8600 will |
| redraw the screen at the interval you specify. This feature is |
| disabled by default. Click to put a check mark in the box next to |
| Enable Refresh to enable this feature. |
| Note: 1. The switch starts counting the time interval when |
| mouse movement stops. |
| 2. Enabling this feature increases the volume of video |
| data transmitted over the network. The lower the |
| number specified, the more often the video data is |
| transmitted. Setting too low a value may adversely |
| affect overall operating responsiveness. |
|
|
Transparency | Drag the slider bars to adjust the transparency of the remote |
| display. |
|
|
Color Depth Control | This setting determines the richness of the video display by |
| adjusting the amount of color information. |
|
|
Detect Tolerance | This setting also relates to video quality. It governs detecting or |
| ignoring pixel changes. A high setting can result in a lower quality |
| display due to less data transfer. A lower setting will result in |
| better video quality, but setting the threshold too low may allow |
| too much data to be transferred, negatively impacting network |
| performance. |
|
|
Click OK to save your changes and close the dialog box.
Click Cancel to abandon your changes and close the dialog box.
Note: For best results, change the gamma while viewing a remote computer.
79