Acer Altos R710 manual BIOS setup, Feature, Options, Help Text, Description, Disable BSP

130			5 BIOS setup
Feature	Options	Help Text	Description

Resume on	Stays Off
AC Power	Power On
Loss	Last State

Determines the mode of	“Last State” is
operation if a power loss	only displayed if
occurs. Stays off, the sys-	the Intel Man-
tem will remain off once	agement Mod-
power is restored. Power	ule is present.
On, boots the system after	When displayed,
power is restored.	“Last State” is
	the default.
	When set to
	“Stays Off,”
	“Power Switch
	Inhibit” is dis-
	abled.

FRB-2 Policy	Disable BSP
	Do not dis-
	able BSP
	Retry on
	Next Boot
	Disable
	FRB2 Timer

This controls action if the boot processor will be dis- abled or not.

“Disable BSP” and “Do not dis- able BSP” are only displayed if the Intel Man- agement Mod- ule is present.

Late POST	Disabled
Timeout	5 minutes
	10 minutes
	15 minutes
	20 minutes

This controls the time limit for add-in card detection. The system is reset on tim- eout.

Hard Disk	Disabled
OS Boot	5 minutes
Timeout	10 minutes
	15 minutes
	20 minutes

This controls the time limit allowed for booting an operating system from a Hard disk drive. The action taken on timeout is deter- mined by the OS Watch- dog Timer policy setting.

PXE OS Boot	Disabled
Timeout	5 minutes
	10 minutes
	15 minutes
	20 minutes

This controls the time limit allowed for booting an operating system using PXE boot. The action taken on timeout is deter- mined by OS Watchdog Timer policy setting.