36 | 4 Configuring the system |
Opening the server
Caution! Before you proceed, make sure that you have turned off your system and all peripherals connected to it. Read the “Preinstallation instructions” on page 34.
You need to open the server before you can install additional components. The top panel is removable to allow access to the system’s internal components. Refer to the following sections for instructions.
Before opening the server
Before opening the server, observe the following precautions:
1Turn off the system and all the peripherals connected to it.
2Unplug all cables from the power outlets.
3Place the system unit on a flat, stable surface.
Note: Because of the R710 design specification, the top panel needs to be removed to access the system board.
