174 | Appendix B: |
thumbscrew.
6.Press and hold the left and right Slide Extension Release Levers and slowly move the Slide Rails throughout their entire range of motion. Ensure the CMA folds and expands without binding. If binding is noticed, recheck mounting of CMA as described in Required Installation Position of the CMA.
Placing and Securing Cabling Within the CMA
1.After installing the component in the Slide Rails, fully extend the Slide Rails until they lock.
2.Connect all required cables to the component.
3.Place the cables in the cable cutouts and into the cabling channels.
4.Use the six supplied straps to secure the cables within the cabling channels.
