3

Product briefing

This section provide basic information concerning the configuration of your Altos R710 system.

Processor

Single or dual Intel® XeonTM processor with 800 MHz FSB

CPU Hyper-ThreadingTMTechnology support

Supports Extended memory 64bit technology (EM64T)

Memory subsystem

Six (240 - pin) DIMM slots

DDR-2 400 MHz registered memory modules supported

Maximum upgrade - 12 GB

2-way memory interleave

SDDC (Single Device Data Correction) for memory error detection and correction of any number of bit failures in a single x4 memory device

Memory sparing technology

When memory sparing is enabled, the spare DIMM will not be detected by OS

The sparing DIMM will be reserved for the standby purpose and cannot be accessed by the system1

Memory mirroring technology

When memory mirroring is enabled, only half of the memory capacity will be detected by the OS.

Please refer to page115 "Memory Configuration Sub-menu Selections" for more information about configuring the memory sparing or mirroring in the BIOS Setup utility

1For example, if six 1GB DIMMs are installed (6 GB memory) only 4GB of memory (in DIMM 1B, 1A, 2B, 2A) can be accessed by the system. Memory in DIMM 3B and DIMM 3A would be reserved as spare DIMMs

Page 15
Image 15
Acer Altos R710 manual Product briefing, Processor, Memory subsystem