Acer Altos R710 manual Removing the Chassis Cover

37

Removing the Chassis Cover

The Altos R710 Server must be operated with the top cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components inside of the platform. Before removing the top cover, power down the server system and unplug all peripheral devices and the AC power cable. None of the components inside of the platform is hot-swappable.

1Observe the safety and ESD precautions at the beginning of this book.

2Turn off all peripheral devices connected to the server. Turn off the server.

3Disconnect the AC power cord.

4Remove the shipping screw if it is installed.

5While holding the blue botton at the top of the chassis in, slide the top cover back until it stops.

6Lift the cover straight up to remove it from the platform.