Acer manual Removing a Slim line Optical Drive from Altos R710

61

Removing a Slim line Optical Drive from Altos R710

1Power down the server system and unplug all peripheral devices and the AC power cable.

2Remove the chassis cover.

3Remove the front bezel.

4Open the connector on the rear of the CD-ROM by pulling up on the connector.

5Disconnect the data cable from the rear of the CD-ROM, or DVD- ROM drive.

6Push in on the blue lever at the rear of the drive carrier Remove the drive carrier at the left side of the chassis to release the drive carrier.

7Slide the drive carrier out through the front of the chassis.

8Disconnect the interposer board by removing the two screws for a CD-ROM or DVD ROM.

9Press downward on the side of the tray and release the drive from the tray. Lift the Optical Drive out of the CD-ROM Carrier.

10Store the tray for future use.

11Install Slimline filler panel.If installing a new Optical Drive start from step “Install a Slimline Optical Drive into Altos R710”.

12Install Slimline filler panel.

13Install the chassis cover.

14Install the front bezel.