71
Jumper | Pins | What happens at system reset?? | |
Name | |||
|
| ||
|
|
| |
CMOS Clear | These pins should be jumpered for normal system | ||
(line “C” in |
| operation. | |
figure |
|
| |
|
| ||
above) | If these pins are jumpered, the CMOS settings will | ||
|
| be cleared on the next reset. These pins should not | |
|
| be jumpered for normal operation. | |
|
|
|
Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the requirements outlined below. For a list of qualified components.
Processor
One or two Intel® Xeon™ processors with an 800MHz front side bus and a minimum of 2.8 GHz frequency must be installed. The following table outlines the supported processors. For a complete list of
supported processors.
Processor Family | FSB Frequency | Frequency |
|
|
|
Intel® Xeon™ | 800 MHz | 2.8 GHz |
|
|
|
Intel® Xeon™ | 800 MHz | 3.0 GHz |
|
|
|
Intel® Xeon™ | 800 MHz | 3.2 GHz |
|
|
|
Intel® Xeon™ | 800 MHz | 3.4 GHz |
|
|
|
Intel® Xeon™ | 800 MHz | 3.6 GHz |
|
|
|