To directly select a second stage port, enter this combination:
[Alt+Ctrl+Shift]+#+#+[Enter]
Where the first # represents the port number on the first stage switch, and the second # represents the port number on the second stage switch that the computer you wish to access is attached to.
To directly select a third stage port, enter this combination:
[Alt+Ctrl+Shift]+#+#+#+[Enter]
Where the first # represents the port number on the first stage switch, the second # represents the port number on the second stage switch, and the third # represents the port number on the third stage switch that the computer you wish to access is attached to.
Note: # is a digit between 1 and 6 for a
4.Hot Key Summary:
Hot Key functions are summarized in the table, below:
Scan
Results For Correct Hot Keys*
ŸFilters out the Hot Keys and beeps once
ŸScans powered on computers one by one and flashes corresponding LED
ŸScan rate is set by the DIP switch of the 1st stage
ŸPressing the Space bar stops this mode
Prev/Next | Ÿ Filters out the Hot Keys and beeps once |
| Ÿ [RightShift] selects a higher numbered computer |
| Ÿ [LeftShift] selects a lower numbered computer |
| Ÿ Pressing the Space bar stops this mode |
Direct | Ÿ Filters out the Hot Keys and beeps once for a ready port; otherwise, beeps twice |
| Ÿ Switches to the selected port |
