wF3 SET:

This function allows the Administrator and each User to set up their own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login.

To change a setting:

1.Double Click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Setting

Function

OSD HOTKEY

Selects which Hotkey activates the OSD function: [Scroll Lock]

 

[Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may

 

conflict with programs running on the computers, the default is

 

the Scroll Lock combination.

 

 

PORT ID

Allows you to position where the Port ID appears on the screen.

DISPLAY

The default is the upper right corner, but you can choose to have

POSITION

it appear anywhere on the screen.

 

Use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on

 

the numeric keypad with Num Lock off), to position the Port ID

 

display, then press [Enter] to lock the position and return to the

 

Set submenu.

 

Note: The ID display position for each port on the installation is

 

set independently; the choice specified here only applies to the

 

currently active computer.

 

 

PORT ID

Determines how long a Port ID displays on the monitor after a

DISPLAY

port change has taken place. The choices are: User Defined -

DURATION

which lets you select the amount of time (from 1 - 255 sec.); and

 

Always On - which displays the Port ID at all times. If you select

 

User Defined, key in the number of seconds, then press [Enter].

 

The default is 3 Seconds.

 

 

(Table continues on next page)

32

CS-1754 / CS-1758 User Manual