(F4 ADM: continued)
Setting | Function |
EDIT PORT | To help remember which computer is attached to a particular |
NAMES | port, every port can be given a name. This function allows the |
| Administrator to create, modify, or delete port names. |
| Note: Only the Ports currently chosen for the LIST view on the |
| main OSD screen (see p. 31), show up here. |
| To Edit a port name: |
| 1. Use the Navigation Keys to move the highlight bar to it, then |
| press [Enter]. |
| 2. Key in the new Port Name, or modify/delete the old one. The |
| maximum number of characters allowed for the Port Name is |
| 12. Legal characters include: |
| w All alpha characters: a - z; A - Z |
| w All numeric characters: 0 - 9 |
| w + |
| Case does not matter; OSD displays the Port Name in all |
| capitals no matter how they were keyed in. |
| 3. When you have finished editing, press [Enter] to have the |
| change take effect. To abort the change, press [Esc]. |
|
|
RESTORE | This function is used to undo all changes - except for the Port |
DEFAULT | Names, Usernames / Passwords, and QUICK VIEW port settings |
VALUES | - and return the setup to the original factory default settings. |
|
|
CLEAR THE | This function is similar to Restore Default Values. The difference |
NAME LIST | is that it also clears the Port Names and QUICK VIEW settings |
| along with undoing all changes and returning the setup to the |
| original factory default settings. |
|
|
ACTIVATE | Choices are Y (for On), or N (for Off). When activated, the |
BEEPER | beeper sounds whenever a Port is changed; when activating the |
| Auto Scan function (see p. 37); or an invalid entry is made on an |
| OSD menu. The default is Y. |
|
|
(Table continues on next page)
35 |