w
MVs | Computers | MVs | Computers | MVs | Computers | MVs | Computers | |
1 | 1 | - 4 | 7 | 19 - 22 | 13 | 37 - 40 | 19 | 55 - 58 |
2 | 4 | - 7 | 8 | 22 - 25 | 14 | 40 - 43 | 20 | 58 - 61 |
3 | 7 - 10 | 9 | 25 - 28 | 15 | 43 - 46 | 21 | 61 - 64 | |
4 | 10 | - 13 | 10 | 28 - 31 | 16 | 46 - 49 |
|
|
5 | 13 | - 16 | 11 | 31 - 34 | 17 | 49 - 52 |
|
|
6 | 16 | - 19 | 12 | 34 - 37 | 18 | 52 - 55 |
|
|
|
|
|
|
|
|
|
|
|
Troubleshooting
Symptom | Possible Cause | Action | |
Erratic | Unit not receiving | Use a DC 5V power adapter if you are not | |
behavior. | enough power. | already using one. If you are already using a | |
|
| power adapter, check that it matches the | |
|
| system specifications (DC 5V), and that it is | |
|
| plugged in and functioning properly. | |
|
|
| |
Keyboard | Keyboard and/or | Press and hold port selection switches 1 and 2 | |
and/or Mouse | mouse need to be | for two seconds. | |
not responding. | reset. |
| |
Unplug the cable(s) from the console port(s), | |||
|
| ||
|
| then plug it/them back in. | |
|
|
| |
| No connection to | Check the cable from the switch to the computer | |
| the computer. | to make sure it is properly connected. | |
|
|
| |
| KVM switch needs to | Power off all devices on the installation (see the | |
| be reset. | note at the top of p. 8); power off the KVM | |
|
| switch; wait five seconds; then power up. |
47 |