(F4 ADM: continued)

Setting

Function

SET QUICK

This function lets the Administrator select which Ports to include as

VIEW PORTS

Quick View ports.

 

Note: Only the Ports currently chosen for the LIST view on the

 

main OSD screen (see p. 31), show up here.

 

w To select/deselect a port as a Quick View Port, use the

 

Navigation Keys to move the highlight bar to it, then

 

Press [Enter].

 

w When a port has been selected as a Quick View Port, an

 

arrowhead displays in the QV column of the LIST on the Main

 

Screen to indicate so. When a port is deselected, the

 

arrowhead disappears.

 

w If one of the Quick View options is chosen for the LIST view

 

(see p. 31), only Ports that have been selected here will show

 

up on the LIST display on the main OSD screen.

 

w If one of the Quick View options is chosen for Auto Scanning

 

(see p. 33), only Ports that have been selected here will be Auto

 

Scanned.

 

The default is for no ports to be selected.

 

 

SET

This function allows the Administrator to define User access to

ACCESSIBLE

the computers on the installation on a Port-by-Port basis. For

PORTS

each User, select the target Port; then press the [Spacebar] to

 

cycle through the choices: F (Full access), V (View Only) or

 

blank. Repeat until all access rights have been set, then press

 

[Esc]. The default is F for all users on all Ports.

 

Note: A blank setting means that no access rights are granted.

 

The Port will not show up on the User’s LIST on the Main Screen.

 

 

FIRMWARE

In order to upgrade the CS-1754 / CS-1758’s firmware (see p.

UPGRADE

39), you must first invoke Firmware Upgrade Mode with this

 

setting.

 

 

PORT OS

Specifies the operating platform of the computer attached to each

 

port. For each port, press the [Spacebar] to cycle through the

 

choices (PC Compatible, Sun, and Mac). Repeat until all the ports

 

have been set, then press [Esc]. The default is PC Compatible.

 

 

36

CS-1754 / CS-1758 User Manual