CS-82A Hotkey Operation

The CS-82A provides the following Hotkey Port Selection features:

ŠSelecting the active port

ŠAuto Scan Mode

Selecting the Active Port

The default method to toggle the KVM focus between the two ports from the keyboard is to tap the left or right Ctrl key twice:

[Ctrl] [Ctrl]

Note: The combination must be on the same side (both left or both right).

If the Ctrl key combination conflicts with programs running on your computer, you can switch the hotkey to the Scroll Lock key by pressing and holding both the CS-82A’s Port Selection Pushbuttons for three seconds. After this, tap the Scroll Lock key twice to toggle the KVM focus.

[Scroll Lock] [Scroll Lock]

Note: To switch back to the default hotkey, press and hold both the Port Selection Pushbuttons for three seconds again.

Auto Scan Mode

The CS-82A’s Auto Scan feature automatically cycles the KVM focus through the two/four computers at regular five second intervals so that you can monitor their activity without switching from port to port manually. To invoke Auto Scan Mode, do the following:

1.Press and release [Left Shift].

2.Press and release [Right Shift].

- 13 -