Setting the CS-82A’s Scan Interval

The default amount of time that the CS-82A dwells on each port is five seconds. You can change the scan interval at any time while Auto Scan is in effect by keying in a number from 1 to 4 that corresponds to the following scan intervals:

Number

Scan Interval

 

 

13 seconds

25 seconds (default)

310 seconds

420 seconds

Once scanning begins, it continues until you press the [Spacebar] to exit Auto Scan Mode. The port that has the KVM focus at the time scanning stops remains active.

Note: While Auto Scan Mode is in effect, the console will not function normally. You must exit Auto Scan Mode by pressing the [Spacebar] in order to regain control of the console.

- 14 -