Once scanning begins, it continues until you press the [Spacebar] to exit Auto Scan Mode. The port that was currently active at the time scanning stopped remains active.

Note: While Auto Scan Mode is in effect, the console will not function. You must exit Auto Scan Mode in order to regain control of the console.

Last/Next Mode

This feature allows you to switch between computers in order to monitor then manually. You can dwell on a particular port for as long as you like – as opposed to Auto Scan Mode, which switches after a fixed interval. To invoke Last/Next Mode, do the following:

1.Press and release [Alt+Ctrl+Shift].

2.Press and release 9.

3.Press [Enter].

Once Last/Next Mode is active, pressing the left Shift Key [LShift] switches to the previous computer (from the currently active one); pressing [RShift] switches to the next computer in the installation.

Note: 1. There is another, shorter Hotkey combination to invoke Last/Next Mode switching: Simply press the Left Ctrl key twice in succession ([LCtrl] + [LCtrl]) to switch to the previous computer; or press the Right Ctrl key twice ([RCtrl] + [RCtrl]) to switch to the next computer. This method is available all the time – it does not have to be invoked with [Alt+Ctrl+Shift].

2.While Last/Next Mode is in effect, none of the other keyboard keys will function. You must exit Last/Next Mode be pressing the [Spacebar] in order to use the console for anything else.

- 16 -