CS-88A User Manual

Components

Front View

 

 

1&2

3

4

 

 

 

 

 

No.

Component

 

Description

 

 

 

 

1

Port Selection

Press a switch to access the computer attached to the

 

Switches

corresponding port.

 

 

ŠPressing Buttons 1 and 2 simultaneously for 3 seconds performs a Keyboard and Mouse Reset.

ŠPressing 7 and 8 simultaneously starts Auto Scan Mode (see page 29).

2

Port LEDs

The Port LEDs are built into the Port Selection

 

 

Switches. The upper ones are the On Line LEDs; the

 

 

lower ones are the Selected Port LEDs:

 

 

Š The On Line LEDs light ORANGE to indicate that the

 

 

computer attached to the corresponding port is up

 

 

and running. If the LED is flashing, it indicates that

 

 

the Port is being used for cascading to another

 

 

Master View switch (see Two Stage Installation,

 

 

page 10).

 

 

Š The Selected LEDs light GREEN to indicate that the

 

 

computer attached to the corresponding port is the

 

 

one that has the KVM focus. The LED is steady

 

 

under normal conditions, but flashes when its port is

 

 

accessed under Auto Scan Mode (see F7: SCAN,

 

 

page 29).

 

 

 

3

Reset Button

Use a small object (such as the end of a paper clip, or a

 

 

ballpoint pen) to press this recessed switch to initiate a

 

 

warm reset. If the switch is kept in for longer than three

 

 

seconds, a cold reset takes place.

 

 

 

4

Power LED

Lights (blue) to indicate that the unit is receiving power.

 

 

 

4