This function allows the Administrator and each User to set up his own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login.
To change a setting:
1.Move the highlight bar to it, then press [Enter].
2.After you select an item, a submenu with further choices appears. To make a selection, move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:
Setting | Function |
|
|
OSD HOTKEY | Selects which Hotkey activates the OSD function: |
| [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. |
| Since the Ctrl key combination may conflict with programs running |
| on the computers, the default is the Scroll Lock combination. |
|
|
PORT ID | Allows you to position where the Port ID appears on the screen. |
DISPLAY | The default is the upper right corner, but you can choose to have it |
POSITION | appear anywhere on the screen. |
| Use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on the |
| numeric keypad with Num Lock off), to position the Port ID display, |
| then press [Enter] to lock the position and return to the Set |
| submenu. |
| Note: The ID display position for each port on the installation is set |
| independently; the choice specified here only applies to the |
| currently active computer. |
|
|
PORT ID | Determines how long a Port ID displays on the monitor after a port |
DISPLAY | change has taken place. The choices are: User Defined - which |
DURATION | lets you select the amount of time (from |
| On - which displays the Port ID at all times. If you select User |
| Defined, key in the number of seconds, then press [Enter]. The |
| default is 3 Seconds. |
|
|
| (Continues on next page.) |
24