CS-88A User Manual

(Continued from previous page.)

Setting

Function

 

 

SET QUICK

This function lets the Administrator select which Ports to include as

VIEW PORTS

Quick View ports.

 

Note: Only the Ports currently chosen for the LIST view on the

 

main OSD screen show up here.

 

Š To select/deselect a port as a Quick View Port, use the Naviga-

 

tion Keys to move the highlight bar to it, then press [Spacebar].

 

Š When a port has been selected as a Quick View Port, an arrow-

 

head displays in the QV column of the LIST on the Main Screen

 

to indicate so. When a port is deselected, the arrowhead disap-

 

pears.

 

Š If one of the Quick View options is chosen for the LIST view (see

 

F2 LIST, page 23), only a Port that has been selected here

 

will display on the List.

 

Š If one of the Quick View options is chosen for Auto Scanning

 

(see SCAN MODE, page 25), only a Port that has been selected

 

here will be Auto Scanned.

 

The default is for no ports to be selected.

 

 

SET

This function allows the Administrator to define User access to the

ACCESSIBLE

computers on the installation on a Port-by-Port basis.

PORTS

For each User, select the target Port; then press the [Spacebar] to

 

 

cycle through the choices: F (Full access), V (View Only), or blank.

 

Repeat until all access rights have been set, then press [Enter].

 

The default is F for all users on all Ports.

 

Note: A blank setting means that no access rights are granted. The

 

Port will not show up on the User's LIST on the Main Screen.

 

 

28