CS-88A User Manual

Restoring Original Factory Default Settings

You can restore the original factory default settings for the CS-88A. The original password for the default administrator account is restored; all administrator and user accounts are removed from the system. Only the station name and date and time are retained. This procedure requires the use of a jumper cap.

1.Turn off the CS-88A and unplug the power cord.

2.Remove the cover of the CS-88A.

3.Place a jumper cap over pins 1-2 of the J22 jumper on the mainboard.

4.Plug in the power cord and turn on the CS-88A. The following directions appear on the KVM console screen:

USERNAME AND PASSWORD INFORMATION AND PORT/USER INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN RESTART.

5.Turn off the CS-88A and unplug the power cord.

6.Remove the jumper cap from pins 1-2 of the J22 jumper.

7.Replace the cover on the KVM switch. Plug in the power cord and turn on the CS-88A.

8.You should now use the default username and password to log in to the CS-88A.

44