MAuto Scanning
Auto Scan automatically switches among all the active CPU Ports that are accessible to the currently logged on User at regular intervals (see Scan Mode of the OSD F3 SET function, p. 26), so that he can monitor their activity automatically.
Setting the Scan Interval:
The amount of time Auto Scan dwells on each port is set with the Scan Duration setting of the OSD F3 SET function (see p. 26). You can change the scan interval before activating Hotkey Auto Scanning, if you wish, with the following Hotkey combination:
1.Invoke Hotkey Mode (see p. 15)
2.Key in [T] [n]
Where [T] is the letter T, and [n] is a number from
The letter T, and the numbers display on the Command Line as you key them in. If you make a mistake, use [Backspace] to erase the wrong number.
3.Press [Enter]
After you press [Enter], you automatically exit Hotkey Mode, and are ready to start Auto Scanning.
17 |
