MF4 ADM:
F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].
In order for this item to appear on the OSD Main Screen, a login with the Administrator’s Username and Password is required. See OSD Overview, p. 21, for setting the Administrator’s Username and Password the first time the OSD is invoked.
After you select an item, a submenu with further choices for you to select from appears. Move the Highlight Bar to the choice you want, then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:
Setting | Function |
SET | This function is used to set Usernames and Passwords for the |
USERNAME | Administrator and Users: |
AND |
|
PASSWORD | 1. Usernames and Passwords for one Administrator and four |
| Users can be set. |
| 2. After you select one of the User fields or the Administrator field, |
| a screen that allows you to key in a Username and Password |
| appears. The password may be up to 15 characters long, and |
| can consist of any combination of letters and numbers |
| (A - Z, 0 - 9). |
| 3. For each individual, key in the Username and Password, then |
| press [Enter]. |
| 4. To modify or delete a previous Username and/or Password, |
| use the backspace key to erase individual letters or numbers. |
| Note: To clear all Username and Password information and have |
| the Switch return to its default (empty) state, see p. 34. |
|
|
SET LOGOUT | If there is no input from the console for the amount of time set |
TIMEOUT | with this function, the Operator is automatically logged out. A |
| login is necessary before the console can be used again. This |
| enables other Operators to gain access to the computers when |
| the original Operator is no longer accessing them, but has |
| forgotten to log out. To set the timeout value, key in a number |
| from 1 - 180 minutes, then press [Enter]. If the number is 0 |
| [zero], this function is disabled. Default is 0. |
|
|
(Table continues on next page)
27 |
