Appendix
IP Address Determination
If you are an administrator logging in for the first time, you need to access the Energy Box in order to give it an IP address that users can connect to. There are two methods to choose from. In each case, your client computer must be on the same network segment as the Energy Box. After you have connected and logged in you can give the device its fixed network address. (See IPv4 Configuration, page 37)
Method 1:
For computers running Windows, an IP address can be determined and/or assigned with the IP Installer utility. The utility can be obtained from the Download area of our web site or from the software CD. Look under Driver/ SW, and the model of your device. After downloading the utility to your computer, do the following:
1.Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2.Go to the directory that you unzipped the IPInstaller program to and run IPInstaller.exe. A dialog box similar to the one below appears:
(Continues on next page.)
97