KL1116 User Manual
(Continued from previous page.)
No. | Component | Description |
|
|
|
4 | Port | Press a switch to bring the KVM focus to the computer attached |
| Switches | to its corresponding port. See Manual Port Switching, page 24 |
| and Port | for details. |
| LEDs | Two Port LEDs are built into the Port Switches. The one on the |
|
| left is the On Line LED; the one on the right is the Selected Port |
|
| LED: |
|
| An On Line LED lights GREEN to indicate that the computer |
|
| attached to its corresponding port is up and running. |
|
| A Selected LED lights ORANGE to indicate that the computer |
|
| attached to its corresponding port is the one that has the KVM |
|
| focus. The LED is steady under normal conditions, but flashes |
|
| when its port is accessed under Auto Scan Mode (see |
|
| |
|
|
|
5 | Keyboard | Standard |
|
|
|
6 | Touchpad | Standard mouse touchpad. |
|
|
|
7 | Lower | Pull to slide the keyboard and touchpad module out. See item 1 |
| Handle | in this table and Opening the Console, page 15 for more details |
|
| on sliding the console in and out. |
|
|
|
8 | Power LED | Lights BLUE to indicate that the unit is receiving power. |
|
|
|
9 | Lock LEDs & | The Num Lock, Caps Lock, Scroll Lock LEDs are located |
| Reset Switch | here. |
|
| A Reset Switch is located just to the right of the Lock LEDs. |
|
| Press this recessed switch in with a thin object to perform a |
|
| system reset. |
|
|
|
10 | Release | These catches (one on each side of the keyboard) release the |
| Catch | keyboard and touchpad module so you can slide it away. |
|
|
|
11 | Firmware | Firmware Upgrade Port: The Firmware Upgrade Cable that |
| Upgrade | transfers the firmware upgrade data from the administrator's |
| Section | computer to the KL1116 plugs into this |
|
| Firmware Upgrade Switch: During normal operation this |
|
| switch should be in the NORMAL position. (The Firmware |
|
| Upgrade Utility, page 47 for more details.) |
|
|
|
12 | Rack | The rack mounting brackets located at each corner of the unit |
| Mounting | secure the chassis to a system rack. See Standard Rack |
| Brackets | |
|
|
|
6