KL1116 User Manual
Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following:
1.Invoke HKM (see page 41).
2.Press and release the [B] key.
The Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
[Num Lock] + | [Port ID] [Enter] | Switches the KVM focus to the computer that |
|
| corresponds to that Port ID. |
|
|
|
| [T] [n] [Enter] | Sets the Auto Scan interval to n seconds – where |
|
| n is a number from |
|
|
|
| [A] | Invokes Auto Scan Mode. |
|
| When Auto Scan Mode is in effect, press [P] or |
|
| |
|
| When Auto Scanning is paused, press any key or |
|
| |
|
|
|
| [←] | Invokes Skip Mode and skips from the current port |
|
| to the first previous accessible port. |
|
|
|
| [→] | Invokes Skip Mode and skips from the current port |
|
| to the next accessible port. |
|
|
|
| [↑] | Invokes Skip Mode and skips from the current port |
|
| to the last accessible port of the previous station. |
|
| If you are at a port on the First Station you cycle |
|
| backward to the last accessible port on the Last |
|
| Station. |
|
|
|
| [↓] | Invokes Skip Mode and skips from the current port |
|
| to the first accessible port of the next station. If |
|
| you are at a port on the Last Station you cycle |
|
| forward to the first accessible port on the First |
|
| station. |
|
|
|
| [B] | Toggles the beeper on or off. |
|
|
|
Note: The brackets in the table above indicate keys you should press. Simply press the indicated keys, do not type the brackets.
46