ATEN Technology KL1116 Clear Login Information

Appendix

Clear Login Information

If you are unable to perform an Administrator login (because the Username and Password information has become corrupted, or you have forgotten it, for example), you can clear the login information with the following procedure:

1.Power off the switch and remove the top cover from the unit chassis.

2.Short the jumper labeled Restore Default Password on the switch's main board.

3.Power on the switch.

When you power the switch on, the following message appears on the LCD display:

USERNAME AND PASSWORD INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN RESTART.

4.After you start back up, the OSD login function acts exactly the way it did the first time the switch was run (see OSD Overview, page 27) and you can reset passwords for the Administrators and Users.

63