An explanation of the actions is given in the table, below:
Action Explanation
Exit remote location Breaks the connection to the KN2116 and returns you to
local operation.
Adjust Video Brings up the video adjustment utility.
Toggle OSD Toggles the OSD display Off and On.
Toggle mouse display If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to shrink the non-functioning pointer down to a
barely-noticeable tiny circle - which can be ignored. Since
this function is a toggle - use the hotkeys again to bring the
mouse display back to its original configuration.
Adjust mouse This utility synchronizes the local and remote mouse
movements following a video resolution change. After
invoking this utility, simply click the local mouse pointer on
top of the remote mouse pointer.
Substitute Alt key Although all other keyboard input is captured and sent to
the KN2116, [Alt + Tab] and [Ctrl + Alt + Del] work on your
local computer. In order to implement their effects on the
remote system, a function key is be substituted for the Alt
key. If you substitute the F12 key, for example, you would
use [F12 + Tab] and [Ctrl + F12 + Del].
Note: To invoke an action, you must press and release the keys one key at a time.
If you find the default Hotkey combinations inconvenient, you can configure
them to whatever suits your taste, as follows:
1. Highlight the Action, then Click Start
2. Key in the Function keys (one at a time). The key names appear in the
Key field as you press them.
3. When you have finished keying in your sequence, Click Stop
4. Click Set
5. Repeat for any other actions you wish to set up
Note: You can use the same function keys for more than one action, as long
as the first key is not the same. For example, you can use F1 F2 F3
for one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.
2005-08-24
Chapter 5. The Windows Client
51