ATEN Technology KN2108 user manual Description of the items is given in the table, below

Chapter 8. The Log Server

A description of the items is given in the table, below:

Item	Explanation
New search	This is one of three radio buttons that define the scope of
	the search. If it is selected, the search is performed on all
	the events in the database for the selected KN2018 /
	KN2116.
Search last results	This is a secondary search performed on the events that
	resulted from the last search.
Search excluding last	This is a secondary search performed on all the events in
results	the database for the selected KN2018 / KN2116 excluding
	the events that resulted from the last search.
KN2018 / KN2116	KN2018 / KN2116 units are listed according to their IP
List:	address. Select the unit that you want to perform the
	search on from this list. You can select more than one unit
	for the search. If no units are selected, the search is
	performed on all of them.
Priority	Sets the level for how detailed the search results display
	should be. 1 is the most general; 3 is the most specific.
Start Date	Select the date that you want the search to start from. The
	format follows the MM/DD/YYYY convention, as follows:
	05/11/2002
Start Time	Select the time that you want the search to start from. The
	format follows the HH:MM:SS convention, as follows:
	13:45:08
End Date	Select the date that you want the search to end at.
End Time	Select the time that you want the search to end at.
Pattern	Key in the pattern that you are searching for here. The
	multiple character wildcard (%) is supported. E.g., h%ds
	would match hands and hoods.
Results	Lists the events that contained matches for the search.
Search	Click this button to start the search.
Print	Click this button to print the search results.
Exit	Click this button to exit the Log Server.

73

2005-08-24