Mouse Synchronization:
Until you close the KN2018 / KN2116 connection, mouse movements have
no effect on your local system, but are captured and sent to the remote
system, instead.
From time to time, especially if you change video resolution, the local mouse
movement may no longer be synchronized with the remote system’s mouse
pointer. There are three methods that can be used to bring the two pointers
back into sync:
MMoving the mouse pointer into the Control Panel and then moving it back
out again
MPerforming an Auto Sync with the Video Adjustment function (see Video
Adjustment, p. 52 for details).
MInvoking the Adjust Mouse function (see Adjust Mouse, p. 51 for details)
If none of the above procedures resolve the problem, see Additional Mouse
Synchronization Procedures, p. 78 in the Troubleshooting section of this manual.
2005-08-24
KN2018 / KN2116 User Manual
58