VS0102 / VS0104 / VS0108 User Manual
Installation
Single Stage
Installation of the VS0102 / VS0104 / VS0108 is simply a matter of plugging in the appropriate cables.
To install the splitter, refer to the installation diagram on page 10 as you perform the following steps:
1.Use a VGA/Audio cables to connect the VGA/Audio output ports on the source device to the VGA/Audio input ports on the VS0102 / VS0104 / VS0108.
2.Use VGA/Audio cables to connect the VGA/Audio inputs of the video displays and speaker devices to the VGA/Audio output ports on the rear of the VS0102 / VS0104 / VS0108.
3.Use a grounding wire to ground the unit by connecting one end of the wire to the grounding terminal, and the other end of the wire to a suitable grounded object.
4.Plug the provided power adapter into an appropriate AC power source; plug the power adapter cable into the power jack on the VS0102 / VS0104 / VS0108.
5.(Optional) To control the VS0102 / VS0104 / VS0108 system through the
The installation is complete, you may power on the display and source devices.
Note: The VS0102 / VS0104 / VS0108 installations are the same, with the only difference being that the VS0102 has two video display ports, the VS0104 has four video display ports, and the VS0108 has eight video display ports.
8