VS0102 / VS0104 / VS0108 User Manual
EDID Mode Selection Commands
Extended Display Identification Data (EDID) is a data format that contains a display's basic information and is used to communicate with the video source system. You can set up which EDID mode the VS0102 / VS0104 / VS0108 uses with the commands that follow.
The formula for the EDID Mode Selection commands are as follows: EDID Command + Control [Enter]
For example, to switch the EDID setting to auto, type the following:
edid auto [Enter]
The following tables show the possible values and formats for the Control command:
Command | Description |
|
|
edid | Enable EDID selection |
|
|
|
|
Control | Description |
|
|
port1 | Implement the EDID of the |
| connected display to Port 1, and |
| pass it to the video source |
|
|
auto | Implements the true EDID remix |
| of all connected displays. The |
| VS0102 / VS0104 / VS0108 |
| uses the best resolution for all |
| displays. |
|
|
default | Implements ATEN’s default |
| EDID |
|
|
The following table shows the available EDID mode selection command list:
Command | Control | Enter | Description |
|
|
|
|
edid | port1 | [Enter] | The EDID from Port 1 is passed to the |
|
|
| video source |
|
|
|
|
edid | auto | [Enter] | The VS0102 / VS0104 / VS0108 |
|
|
| implements the true EDID remix of all |
|
|
| connected displays and uses the best |
|
|
| resolution for all displays. |
|
|
|
|
edid | default | [Enter] | ATEN’s default EDID is passed to the |
|
|
| video source |
|
|
|
|
14