Athena Technologies 16C Thermocouple, Maximum lead resistance 100 ohms, For rated accuracy

Technical

Specifications

Input Type
Thermocouple	B, C, E, J, K, N, NIC, NNM, R, S, T, Platinel II
	Maximum lead resistance 100 ohms
	for rated accuracy
RTD	Platinum 2- and 3-wire, 100 ohms at
	0° C, DIN curve standard (0.00385)
	1000 ohms available
Linear	0-50 mV/10-50 mV, 0-5 V/1-5 V
	0-20 mA/4-20 mA, 0-100 mV, 0-10 V

Output Device

B5 A (120/240 Vac) relay, normally

open, used for switching resistive loads. If relays or solenoids are to be driven, select the “T” output. If a “B” output is selected, order snubber network 235Z005U01.

E0-20 mA

F4-20 mA, full output to load with 500 ohm impedance max.

GHigh impedance ‘F’ (800 ohms max.)

S20 Vdc pulsed output for solid-state relays.

T1 A @ 120/240 Vac , solid-state relay, zero voltage-switched and optically isolated from drive signal. Only resistive loads to 1A may be controlled directly. Larger loads may be controlled using an external contactor.

Y5 A (120/240 Vac) relay, but normally closed (output 2 only).

Alarm Type

See ordering code on page 55.

31