2.4
Antenna
Locate the antenna connection at the back of the TV. Insert the antenna cable securely into the Antenna a socket.
You can connect your own antenna or connect to an antenna signal from an antenna distribution system (common in certain regions). Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for
2.5
Satellite dish
Locate the
2.6
Network
Wireless connection
What you need
To connect the TV wirelessly to the Internet, you need a wireless router. Use a
File sharing
The TV can find and open files on other devices in your wireless network, like your computer or NAS device. You can use a computer with a Microsoft Windows XP, Vista or Windows 7, Mac OSX or
Media server software
With media server software on your computer, you can open your photos, music and videos stored on your computer on your TV screen.
Use a recent version of media server software like Windows Media Player 11, Twonky™ or similar*.
Install the software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information.
To open your files on the TV, the media server software must be running on your computer.
*In Help, press *List and look up Media server software, supported for an overview of supported media server software.
Make the connection
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless network is switched on.
Step 2 - Press hand select S Setup and press OK. Step 3 - Select Connect to network and press OK. Step 4 - Select Wireless and press OK.
Step 5 - Select Scan to scan for your wireless network. If you have a router with WPS
-Scan
Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity.
-WPS
If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection.
If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
If you must use the WPS pin code to connect, select Scan instead of WPS.
Step 6 - In the list of networks found, select your wireless network and press OK.
If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Manual entry to enter the network name yourself.
Setting up / Network | 7 |
