The device should be connected with an HDMI cable and both
TV and device must have HDMI CEC switched on.
Home Theatre System
You can switch on your Home Theatre System to listen to an
audio di sc or a radi o channel and leave the T V in standby.
To only switch on the HTS, with the TV in standby, press c
SOURCE on the TV remote control.

EasyLink

With EasyLink you can operate a connected device with the
TV remote control. EasyLink uses HDMI CEC to communicate
with the conne cted devices. Devices must support HDMI C EC
and mu st be connected with an HDMI conne ction.
In Help, press * List and look up EasyLink for more
information.
3.6
Subtitles and languages

Subtitles

Switch subtitles on
To open the Subtitle menu, press SUBTITLE.
You can switch subtitlesOn or Off.
To show subtitles when the broadcasted programme is not in
your language - the language you set for the TV, se lect
Automatic. Also, this setting will show subtitles when you
mute the sound with m.
For anal ogue ch annels , s ubtitl es must be m ade avai lable in
Text.
Subtitles for analogue channels
For anal ogue ch annels , you nee d to m ake su btitl es avai lable for
each channel manually.
1 - Switch to a channel and press Text to open Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press Text again to close Text.
If you select On in the Subtitl e menu when watching this
analogue channel, subti tles w ill be shown i f available .
To know if a channel is analogue or digital, switch to the
channel and open Status in the Options menu.
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels.
Digital chan nels can offe r se veral s ubti tle l anguage s for a
programme. You can s et a preferred primary and se condary
subtitle language. If subtitles in one of these languages are
available , the TV will show t hem.
If none of the preferred su btitle languages are available, you can
select another subtitle language which is available.
To set the primary and secondary subtitle language . . .
1 - Press h, select Setup and press OK.
2 - Select Channel settings and select Languages > Primary
subtitles or Secondary subtitles and press OK.
3 - Select a language and press OK.
4 - Press b, repeatedly if necessary, to close the menu.
To select a subtitle language when none of your preferred
languages are available . . .
1 - Press o OPTIONS
2 - Select Subtitle language and select a language you want
temporarily and press OK.

Audio language

Digital TV channe ls can broad cast au dio wi th s everal spoke n
languages for a programme. You can set a preferred primary
and s econdary audio language. If audio i n one of t hese
languages is available, the TV will switch to this audio.
If none of the preferred audio languages is available, you can
select another audio language which is available.
To set the primary and secondary audio language . . .
1 - Press h, select Setup and press OK.
2 - Select Channel settings and select Languages > Primary
audio or Secondary audio and press OK.
3 - Select a language and press OK.
4 - Press b, repeatedly if necessary, to close the menu.
To select an audio language when none of your preferred audio
language is available . . .
1 - Press o OPTIONS
2 - Select Audio language and select an audio language you
want temporarily and press OK.
TV / Subtitles and languages 35