Unicable setup
The Unicable system
You can use a Unicable system to connect the antenna dish to
the TV.
A Unicable system uses one cable to connect the satellite dish
to all satellite receivers in its system . Unicable is typically used
in apartment buildings. If you use a Unicable system, the TV
will ask you to as sign a user band nu mber and corresponding
frequency during the installation. You can install 1 or 2
satellites with Unicable on this TV.
If you notice some missing channe ls after a Unicable
installation, another installation might have been done at the
same moment on the Unicable system. Do the installation
again to install the m issin g channe ls.
User band number
In a Unicable s ystem, each conne cted satellite rece iver must
be numbered (e.g. 0, 1, 2 or 3 etc.). You can find the available
user bands and their number on the Unicable switchbox. User
band is s ometimes s hortened as UB. T here are Unicable
switchboxes that offer 4 or 8 user bands. If you select Unicable
in the settings, the TV will ask you to assign the unique user
band number for its built-in satel lite receiver. A satellite
receive r cannot have th e sam e us er band numbe r as an other
satellite receiver in the Unicable system.
User band frequency
Next to the unique user band number, the built-in satellite
receive r nee ds th e freque ncy of th e se lected user band
number. These frequencies are mostly shown next to the user
band number on a Unicable switchbox.
Add a sa tellite
You can add an additional satellite to your current satellite
installation. The installed satellites and their channels stay
untouched. However, some satellite operators do not allow
adding a satell ite.
The additional satellite should be seen as an extra, it is not
your main s atellite subscription or not the main satellite of
which you use its channel package. T ypically, you would add a
4th satellite when you have 3 satellites already installed. If you
have 4 satellites installed, you might consider removing one
first to be able to add a ne w sate llit e.
Settings
If you currently have only 1 or 2 satellites installed, the current
installation settings might not allow adding an extra satellite. If
you need to change the installation settings, you must redo the
complete satellite installation. You cannot us e Add satellite if a
change of se ttings is needed.
To add a satellite . . .
1 - Press h, select S Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Add satellite and press OK. The current satellites
are sh own.
4 - Select Add and press OK. The TV will search for new
satellites.
5 - If the TV has found one or more satellites, select Install
and pres s OK. T he TV installs the channels of the found
satellites.
6 - To store the channels and radio stations, select Finish and
press OK .
Remo ve a sa tellit e
You can remove one or more satellites from your current
satellite installation. You remove the satellite and its channels.
However, s ome satel lite operators do not allow removin g a
satellite.
To remove satellites . . .
1 - Press h, select S Setup and press OK.
2 - Select Search for satellite and press OK.
3 - Select Remove satellite and press OK. The current
satellites are shown.
4 - Use the arrows keys to select the satellite you want to
remove.
5 - Press OK to mark a satellite to remove. Press OK again to
unmark.
6 - Select Remove, press OK and confirm. The satellites are
removed .
7 - Select Exit and press OK to close Remove satellite.
Reorder and r ename channels
You can reorder and rename satellite channels.
Reorder
You can only reorder channels in the Favourites list. For more
information on Reordering satellite channels, press * LIST
and look u p Satellite, reorder channels.
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of the
channel lists - All, Favourites, Radio or New.
48 Satellite channels / Satellite installation