2 - Select TV settings > General settings > Reinstall TV and
press OK . The installation may take a few minutes. Follow the
instructions on screen.
Factory settings
Factory s ettin gs s ets the TV back to th e origin al TV set tings for
picture, soun d and Ambilight.
To switch back to the original Factory settings . . .
1 - Press h, select S Setup and press OK.
2 - Select TV settings > General settings > Factory settings
and pres s OK.
3 - Press OK to confirm.
4 - Press b, repeatedly if necessary, to close the menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users. In
some countries, Channel list copy is only availble for copying
satellite channels.
With Channel list copy, you can copy the channels installed on
one TV on to anoth er Ph ilips TV of the sam e ran ge. W ith
Channel list copy, you avoid the time-consuming channel
search by uploading a predefined channel list on a TV. Use a
USB flash drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software with
Current software info in S etup > Software settings.
Copy channel list
Copy a channel list
1 - Switch on the TV which has its channels installed. Plug in a
USB memory device.
2 - Press h, select S Setup and press OK.
3 - Select TV settings > General settings > Channel list copy
> Copy to USB and press OK. To copy the channel list from
this TV, you might be asked to enter the Chil d lock code you
entered during the installation.
4 - When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips T V.
Upload channel list
Upload a copied channel list
Depen ding on whe ther y our TV is already ins talled or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 - Plug in the USB memory device that holds the channel list
of the othe r TV.
3 - To start the channel list upload, press h, select S Setup
and pres s OK.
4 - Select TV settings > General settings > Channel list copy
> Copy to TV and press OK. You might be asked to enter
the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting,
press h, select S Setup and press OK. Select Search for
channels > Reinstall channels and press OK. Press b and
later Cancel to leave the Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a reins tallation.
To start the reinstallation, press h, select S Setup and
press OK . Select TV settings > General settings > Reinstall
TV > OK. Select the correct country and skip the Search for
channels . Finish the ins tallation. When done, continu e with
step 2.
2 - Plug in the USB memory device that holds the channel list
of the othe r TV.
3 - To start the channel list upload, press h, select S Setup
and pres s OK.
4 - Select TV settings > General settings > Channel list copy
> Copy to TV and press OK. You might be asked to enter
the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or D VB-C reception
If both DVB-T and DV B-C reception is available in your country
and if this T V is ready to rece ive DVB-T and DVB-C for your
country, you have selecte d one or the oth er during the channel
installation.
If you want to change the DVB s etting to start a new channel
installation, press h, select S Setup and press OK.
Select Channel settings and press OK.
Select Channel installation > Antenna connection > Antenna
(DVB-T) or Cable (DVB-C) and press OK. Select the DVB
setting you want.
DVB-C channel installation
For eas e of u se, all DV B-C s ettin gs are set to autom atic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick s can)
or en ter a spec ific s ymbol rate in th e Settings menu while
installing. To set a Symbol rate, first set the Symbol rate to
Manual.
Channel number conflicts
TV / TV channels 29