Pairing again
You can pair another remote control with this TV.
The method to pair a remote control is different for a remote control already paired with another TV compared with a remote control that is not paired yet.
• The remote control is paired with another TV
To pair, hold the Remote control close to the Philips logo (about 10cm) and press the *Red and *Blue key at the same time. A message will appear if pairing is successful.
• The remote control is not paired yet
To pair, hold the Remote control close to the Philips logo (about 10cm) and press OK. A message will appear if pairing is successful.
For retail
To pair a new - not yet paired - TV with a remote control which is already paired with another TV, hold the Remote control close to the Philips logo (about 10cm) and press the
*Red and *Blue key at the same time. A message will appear if pairing is successful.
Batteries
The TV will notify you when the battery power of the remote control is low.
To replace the batteries, open the battery compartment on the keyboard side of the remote control.
1 - Use a toothpick or other small, blunt object and press the small, square shaped release button to open the lid.
2 - Press the small lever next to the blue clip to release the clip.
3 - Replace the old batteries with 2 type
4 - Press the blue clip down until it clicks.
5 - Reposition the battery cover and press it until it clicks.
Put the remote control down for about 15 seconds to calibrate the pointer.
Remove the batteries if you are not using the remote control for a long time.
Dispose of batteries according to the end of use directives. In Help, press *List and look up End of use for more information.
Cleaning
Your remote control is treated with a
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
3.3
TV channels
Watching TV channels
Switch channels
To watch TV channels, press tTV. The TV tunes to the TV channel you last watched.
Alternatively, press hto open the Home menu and select Watch TV and press OK.
Switch channels
To switch channels, press CH+ or
To switch to a channel from a channel list
While watching a TV channel, press L LIST to open the channel lists.
Select a list in the row of tabs.
In a channel list, navigate to a TV channel or radio station. With the highlight on its icon, press OK to switch to the TV channel or listen to the radio station.
The channel list can have several pages with channels. To view the next or previous page, press CH- or CH+.
To close the channel lists without switching channel, press L LIST again.
TV / TV channels | 25 |
