6 - Technical specification
6TECHNICAL SPECIFICATIONS
Features |
| Description |
(at 25°C enviromental temp.) |
| |
|
|
Total configurability see par. 3.2 pag. 16 par. 4.6 pag. 26
PV Input
(see pag.12 and pag. 16)
From keypad or serial communication the user selects:
the type of input - the associated functions and the corresponding outputs - the type of control algorithm - the type of output and the safe conditions - the type and functionality of the alarms
- the values of all the control parameters.
| A/D converter with resolution of 50.000 points |
| ||
Common | Update measurement time: 0.2 seconds |
| ||
Sampling time: 0.5 seconds |
| |||
characteristics |
| |||
Input bias: - 60…+ 60 digit |
| |||
|
| |||
| Input filter with enable/disable: 1…30 seconds |
| ||
|
|
|
| |
| 0.25% ± 1 digits for temperature sensors |
| ||
Accuracy | 0.1% ±1 digits (for mV) |
| Between 100…240V~ | |
0.1% ±1 digits + accuracy of the used external | the error is minimal | |||
| ||||
| shunt resistor (for mA) |
|
| |
| Pt100Ω at 0°C |
| Max. wire Res.: | |
Resistance | (IEC 751) | 2 or 3 wires | 20Ω max (3 wires) | |
Input drift: | ||||
thermometer |
| connection | ||
| 0.3°C/10°C Env.Temp. | |||
| °C/°Fselectable |
| ||
|
| Ω | ||
|
|
| <0.1°C / 10 Wire Res. | |
| L,J,T,K,S | Internal cold junction | Max. wire Res.: | |
| Ω | |||
| (IEC 584) |
| 150 max | |
Thermocouple | compensation | Input drift: | ||
| ||||
| °C/°F selectable | in °C/°F | <2µV/°C Env. Temp. | |
|
| <0.5µV / 10Ω Wire Res. | ||
| Engineering units |
| ||
DC input (current) | with external shunt 2.5Ω | Conf. decimal point position | Input drift: | |
| Rj >10MΩ | Init. Sc. | ||
| <0.1% / 20°C Env. temp. | |||
DC input (voltage) | 10…50mV, | Full Sc. | ||
| ||||
Rj >10MΩ | (min. range of 100 digits) |
| ||
29