Installation | 5 |
Instruction Manual
Mounting the IWCB Speakers
NOTE: We always recommend a professional be involved in the installation of IWCB speakers.
The IWCB speaker can be easily mounted in most any standard wall mate- rial, from ½ to 1½ inches thick. Its rotating wall clamps firmly fix it to the wall surface after the proper cutout has been made. Here are some impor- tant precautions to take before mounting:
Keep the sides of the actual mounting hole at least ½ inch away from beams or studs to ensure that the clamps have adequate room to rotate. A stud or other obstruction that’s too close will stop them from properly doing their job.
Installation of the IWCB in New
Construction
Atlantic Technology offers an optional
Installation of the IWCB in Existing Construction
Removing and Installing the Grille
Remove the grille from the speaker using an awl or the point of a drywall screw in a grille opening near one of the grille corners.Slowly pry the grille out, being careful not to damage the speaker’s frame or its finish.
To
Cutting the Opening
������� |
������� |
�������� |
������� |
������� |
����������������� |
After determining the best location for the speaker as outlined above, use the enclosed template to cut the proper size hole.
8 1⁄8” x 16 ½” | |
9 5⁄8” x 17 7⁄8” | |
11 1⁄8” x 20 3⁄8” |
WARNING: Exercise extreme care before making any wall cuts to ensure that you will not cut through any wires, pipes, or other items that may be in the wall. You may sometimes, but not always, be able to determine the approximate location of wires and pipes by looking at the locations of nearby outlets and plumbing. But their location or absence is never an assurance that there is not something within the
wall cavity.