Epson IWE3200-H manual First-TimeInstallation and Configuration, Selecting a Power Supply Method

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

The IWE3200-Hcan be powered by either the supplied AC power adapter or the optional IWE500-INJPOE Power Injector. The IWE3200-Hautomatically selects the suitable power de- pending on your decision.

To power the IWE3200-Hby the supplied power adapter:

1.Plug the power adapter to an AC socket.

2.Plug the connector of the power adapter to the power jack of the IWE3200-H.

NOTE:

This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2” or “LPS” and output rated “12V DC, 1.25 A minimum” or equivalent statement.

To power the IWE3200-Hby IWE500-INJ Power Injector:

1.Connect the power cord cable from power outlet to the IWE500-INJpower connector.

To Power Outlet

Fig. 2. Connecting the power cord cable to IWE500-INJ.

2.Check the “POWER” LED: if system is normal, the LED will be on (Green light); otherwise, the “POWER” LED will be off.

3.Connect the Ethernet cable (RJ-45 Category 5) from Ethernet Hub/Switch to the “DATA IN” port of IWE500-INJPower Injector.

4.Connect another Ethernet cable (RJ-45 Category 5) from “POWER & DATA OUT” port of the IWE500-INJPower Injector to the IWE3200-H. Please note the indication on the panel of POE-enabled RJ45 port of IWE3200-H(LAN interface #4).

Fig. 3. POE enabled LAN Port Position.

8