Epson IWE3200-H manual There are up to 7 security modes

Fig. 76. Behavior of the “All APs on This Subnet” wireless client isolation option.

As illustrated in Fig. when AP 1 and AP 2 are using the “This AP Only” option, wireless traffic be- tween STA 1 and STA 2 is blocked by AP 1, while wireless traffic between STA 2 and STA 3, which are associated with different APs, is still allowed. If the “All APs in This Subnet” option is used as shown in Fig. , AP 1 and AP 2 communicates with each other via an inter-AP protocol to share their STA association information to block wireless traffic among all the STAs.

There are up to 7 security modes:

zOpen System. No authentication, no data encryption.

zStatic WEP. WEP (Wired Equivalent Privacy) keys must be manually configured.

zStatic TKIP (WPA-PSK).Only TKIP (Temporal Key Integrity Protocol) mechanism of WPA (Wi-Fi Protected Access) is enabled. In this mode, you have to specify the Pre-shared key, which will be used by the TKIP engine as a master key to generate keys that actually encrypt outgoing packets and decrypt incoming packets.

NOTE:

The number of characters of the Pre-shared key setting must be at least 8 and can be up to 63.

zIEEE 802.1x EAP without Encryption (EAP-MD5). The IEEE 802.1x functionality is enabled and the user-name/password-basedEAP-MD5 authentication is used. No data encryption.

zIEEE 802.1x EAP with Static WEP (EAP-MD5). The IEEE 802.1x functionality is enabled and the user-name/password-basedEAP-MD5 authentication is used. Data encryption is achieved by static WEP.

zIEEE 802.1x EAP with Dynamic WEP (EAP-TLS, EAP-TTLS, PEAP). The IEEE 802.1x functionality is enabled and dynamic WEP key distribution authentication (EAP-TLS,EAP-TTLS, or PEAP) is used. Data encryption is achieved by dynamic WEP.

zIEEE 802.1x EAP with Dynamic TKIP (WPA). This is a full WPA mode, in which both the TKIP and IEEE 802.1x dynamic key exchange mechanisms are enabled. The IWE3200-His highly secured in this mode.

48