IWE500-INJ Power Injector | Epson IWE3200-H guide

C-2: IWE500-INJ Power Injector

Input Power Requirements

AC Input Voltage	: 90	– 264Vac
AC Frequency	: 47	– 63 Hz
AC Input Current	: 2A at 100Vac, 1A at 240Vac, (-48Vdc)

Power over LAN output Specification

Pin Assignments and Polarity: (＋) 4/5 (－) 7/8

Output Voltage: Aggregate Power:50W (48Vdc)

	Mechanical Requirement				: 4” x 5.5” x 1.5”
	Dimensions
	Weight				: 1.38 Lbs
	Indicators
	System Indicator				: AC Power (Green)
					Power Active (Red) 0.05 A＜Io＜0.8 A
	Connectors Shielded Rj-45				Over Current Protection (Red, Flash) Io＞1.0 A


	Environmental Conditions				: 32° to 104° F (0° to 40° C)
	Operating Temperature
	Operating Humidity				: Maximum 90% Non-condensing
	Storage Temperature				: -13° to 185° F (-25° to 85° C)
	Storage Humidity				: Maximum 95%, Non-condensing
	Operating Altitude				: -1000 to 10,000 ft. (-304.8 to 3048 m)

	Safety Approval
	UL 1950
	CSA A22.2 No. 950
	EN 60950
	CB

	Regulatory Compliance
	CE Compliance

Electromagnetic Emission and Immunity

A.FCC Part 15 Class B

74

Image 79

Epson IWE3200-H manual IWE500-INJ Power Injector

Contents

User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview Introduction User Authentication, Authorization, and Accounting FeaturesIeee 802.11b/g Compliant „ Wireless Operation Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature Comparison Selecting a Power Supply Method First-Time Installation and Configuration Mounting the IWE3200-H on a wall Mounting the IWE3200-H on a Wall Connecting the Managing Computer and the IWE3200-H Preparing for Configuration Changing the TCP/IP Settings of the Managing Computer Configuring the IWE3200-HEntering the User Name and Password Home Setup Wizard Selecting an Operational Mode Router with a PPPoE-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a DHCP-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable Connection Setup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server Settings Web Redirection Configuring User Authentication Settings To setup the Local Authentication method Local Authentication SeverPage To setup the mini-POS Ticket Printer How to Setup the mini-POS Ticket PrinterUsage of control keypad Ieee Configuring Radius Settings Deploying the IWE3200-H Configuring Ieee 802.11-Related Settings Setting up Client ComputersTo establish a wireless link to an AP Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network Management AAA. Authentication, Authorization, and Accounting settings Home and Refresh Commands Save, Save & Restart, and Cancel CommandsIWE3200-H Authenticated Users Associated Wireless ClientsSeeing Status Session List Account Table System Specifying Operational ModeManaged LAN Devices Page Managing Firmware Changing PasswordBacking up and Restoring Configuration Set- tings by Http To upgrade firmware of the access Router by Http To restore configuration of the access Router by Http To back up configuration of the access Router by HttpUpgrading Firmware by Tftp TIP To upgrade firmware of the access Router by Tftp To back up configuration of the access Router by Tftp Backing up and Restoring Configuration Set- tings by TftpTo restore configuration of the IWE3200-H by Tftp Address Configuring TCP/IP Related SettingsSetting Time Zone Resetting Configuration to Factory Defaults Router with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection Router with Multiple DSL/Cable Connections DNSDNS Proxy To give an internal server a domain name NATStatic DNS Mappings Basic Functionality To expose preset internal serversDhcp Server Virtual Server Mappings Static Dhcp Mappings Load Balancing Load Balancing Policy Settings Zero Client Reconfiguration Configuring Wireless SettingsCommunication Wireless Distribution System To enable a WDS link Wireless Distribution System settings Security Page Set the Access control type to exclusive MAC-Address-Based Access Control To delete an entry in the access control table Web-redirection mechanism Web Redirection Web redirection enabled with authentication Unrestricted Clients Default authentication failure warning To specify a uncontrolled computer by MAC address Walled GardenTo add a link to the walled garden Radius Robustness Authentication Page Customization Authentication Session Control To specify an advertisement link Authentication success page customization settings Ddns Advertisement links settings To set a rule for packet filtering Configuring Advanced SettingsFilters and Firewall Packet Filters Firewall VlanURL Filters UPnP ManagementTo block Http traffic to an unwelcome Web site System Log Snmp LAN Device ManagementTo specify a trap target To specify a LAN device to manage Example for LAN device management Default Settings DNS Proxy AuthenticationLED Definitions Rear Panel TCP/IP Settings Problems Appendix B Troubleshooting IWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings Problems Wireless Gateway/AP Browse Other Problems IWE3200-H Weight Configuration and ManagementPower Supply Dimensions without antenna IWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer